Tiếng Việt
Pneumatic Tires 12.00-18 , 12.00-20
LỐP HƠI 12.00-18
1. FEATURES – FUNCTIONS
| TT | Specifications | Unit | Data (TCVN/QS 804:2011) |
| 1. | Outer diameter D | mm | 1084±1,5% |
| 2. | Tire sidewall size | mm | 340±3,5% |
| 3. | Eccentricity of synchronized tire (tire, tube, rim) | mm | ≤ 4,0 |
| 4. | Synchronous tire runout | mm | ≤ 6,0 |
| 5. | Load capacity | KN | ≤ 18,5 |
| 6. | Tire pressure | KPa | ≤ 350 |
2. Pneumatic Tires12.00-20
| TT | Specifications | Unit | Technical specifications required (TCVN/QS 804:2011) |
| 1. | Outer diameter D | mm | 1084±1,5% |
| 2. | Side Wall Dimensions | mm | 340±3,5% |
| 3. | Radial runout of synchronized tire (tire, tube, rim) | mm | ≤ 4,0 |
| 4. | Synchronous tire runout | mm | ≤ 6,0 |
| 5. | Load capacity | KN | ≤ 18,5 |
| 6. | Tire pressure | KPa | ≤ 350 |
3. Reference Specifications
Rubber Car Tire 75 12.00-18 20PR (Set)
The parameters printed on the rubber car tire 75-
18 20PR are explained as follows:
12.50: average width of the tire’s contact surface
with the road surface. (Unit is inch; 1 inch = 25.4mm)
18: Rim diameter measurement (inch). Each car tire
line can only use one type of rim size.
20PR: Number of steel and fabric layers; woven from steel fibers arranged
inside the tire
Reviews
There are no reviews yet.